Fingerprint reader ST-PFP-USB

Fingerprint reader ST-PFP-USB

Standalone Fingerprint reader
Supports USB & RS485/232 communication
3,000 fingerprint


Technical Specifications  

CPU 32-bit RISC Core,120MHz,1MB FLASH,128K SRAM
Sensor 500 DPI optic sensor
Cards 125KHz EM
Capacity Fingerprint: 3000, cards: 3000
Each user can enroll 2 fingerprints & 1pc card
ID number Wiegand26 output: 1~16777215 ;Wiegand34 output: 1~4294967295

Verification mode

“Or” mode:fingerprint or card (verify finger- print or card will output wiegand signal)“And” mode:card and fingerprint (after card

verify requires fingerprint will output wiegand signal)

Response time <1s(full of 3000 fingerprints)
FAR < 0.0001 %(security level is 3)
FRR < 0.1 %(security 3)
Reading Distance 5~10cm
Security level 1 ~ 5,default setting:3

Access interface

Wiegand output mode:Wiegand26 or Wie- gand34 can be setRelay output (option):passive contact output


Communication inter- face RS485: 9600~115200 BPS can be setting; noparity ;1stop bit; Flow Control: None

USB: USB1.1 Full speed

Input voltage DC 9V-15V
Working current ≤100mA
Working environment Temperature :-20°C ~ 80°C,Humidity :20% ~ 80%


Key Features


  • Standalone Fingerprint reader
  • Supports USB & RS485/232 communication
  • 3,000 fingerprint users and 3,000 card users
  • Supports to back up users’ data (fingerprint & card user info)
  • Supports to upload & download users’ data
  • Can be used as a standalone access control
  • Wiegand26 output for connecting to a controller
  • One relay output for control door
  • Built-in buzzer
  • Built-in light dependent resistor (LDR) for anti-tamper
  • Support to open door by fingerprint / card / fingerprint + card
  • Fast Verification: Less than 1s base on full enrollment of 3,000 fingerprint



There are no reviews yet.

Be the first to review “Fingerprint reader ST-PFP-USB”

Your email address will not be published. Required fields are marked *